Innovative sheet metal connection technology.

The STOGER screwdriver for fitting flow drilling screws has been specially developed for use in the automotive industry. Different materials with thicknesses of up to 5 mm each can be connected to each other. The system can be used stationary or on robots. SEE THE ADVANTAGES of this solution.

The drive for the axial movement is situated directly above the screwing tool. The force is therefore initiated centrally over the screw. This means that only very small masses are moved, leverage effects are eliminated.

When feeding the screws, the customer can choose between direct feed and magazine-loaded feed with automatic or manual filling. In all variants, the screw is always fed forwards with the screw head and only turned briefly in front of the feeding head in order to preserve the screw tips. The controller monitors and documents all screw parameters.

More Info

Videos

Downloads

Links

Mais Info

THE ADVANTAGES AT A GLANCE

. Fully monitored system with monitoring and documentation of all screw parameters: Torque, rotational angle, screw-in depth, force, contact pressure
. Immediate identification and reporting of any incorrect assemblies
. Screw parameters can be individually parametrized per screw location
. Compact design for hard-to-access screw locations
. Fast bit change without tools
. Feed head can be removed without auxiliary tools
. Feed arm can be changed without auxiliary tools
. Very low moving masses
. Automatic feeding of the screws
. Magazine on the automatic screwdriver with separate filling station
. Gentle feeding principle
. Compact working radius of clamping surface to the screw axis, beneficial robot lever arm
. Can be used as a robot solution in any position

Mais Info

TECHNICAL DATA

. Tool contact pressure. Retaining device contact pressure. Rpm 5,100 min-1
. Approx. 45 kg
. Cycle time 2.7 - 3.5 sec. (depending on plate combination)
. 6 bar compressed air supply
. Required Lines 6
. Max. Length from the cable 60 m
. 120 mm tool stroke
. Feeding stroke (restraint) 30 mm
. NOK stroke (eject screw) 20 mm

FSF brochure

More information

DO YOU HAVE ANY QUESTION?

Contact us using the following contact form or
Visit our facility to clarify any
question. We'll be happy to talk to you!

First name*

Email*

Message*

Last name*

Phone*

Company

How do you want to be contacted?*